ProofTimelineHeat

Building performance / Seven-night comparison

Five-node room and outdoor temperature record

Same house. Same night. Which room cooled fastest?

Before pricing a whole-house retrofit, compare four rooms against the same shaded outdoor reading. One five-box case records seven nights of temperature and humidity, every five minutes. No Wi-Fi, mains wiring or cameras.

Overnight field recordIllustrative
02 Nov · British house · UTC
Rear Kitchen Extension6.6°C drop
0°5°10°15°20°22:3002:3006:30Node 1 · Front Sitting RoomNode 2 · First-Floor LandingNode 3 · Rear Kitchen ExtensionNode 4 · North BedroomNode 5 · Shaded Exterior Reference
22:30
19.6°C
06:30
13.0°C
Outside mean
5.2°C

Fastest cooling room Outdoor reference

4 indoor rooms + 1 shaded exterior reference7 consecutive nights on one UTC clock5-minute intervals with missing readings marked

Choose a night to compare the five curves. These are fictional records prepared to show the field-report format. Each market has its own example.

Observation window

22:30–06:30 UTC

Room air & outdoor air

Temperature through the night

02 Nov · UTC
0°5°10°15°20°22:3000:3002:3004:3006:30Node 1 · Front Sitting RoomNode 2 · First-Floor LandingNode 3 · Rear Kitchen ExtensionNode 4 · North BedroomNode 5 · Shaded Exterior Reference

Fastest cooling on this night: Rear Kitchen Extension, −0.82°C/hr. Shaded outdoor reference: 5.2°C and 82% RH on average.

Choose a room above to highlight its trace. The room with the steepest slope is the one that cooled fastest over this window.

The indoor ranking

Fastest cooling first

Rooms by overnight air-temperature decline, 02 Nov · UTC
Room / node22:3006:30Cooling rate
°C/hr
Rate vs.
node 1
ΔT index
per hour
Air above dew point
mean °C
Node 3Rear Kitchen Extension19.6°C13.0°C−0.823.0×0.0786.4
Node 4North Bedroom19.2°C14.8°C−0.552.0×0.0485.1
Node 2First-Floor Landing19.1°C16.8°C−0.291.0×0.0235.9
Node 1Front Sitting Room20.0°C17.8°C−0.281.0×0.0206.4

Each room is compared with the same exterior node. Surface dew-point crossings and hours of surface condensation are unmeasured by this air-only kit.

How to read the rates and dew point

Overnight cooling rate. Subtract the 22:30 room temperature from the 06:30 reading and divide by eight. More negative means faster room-air cooling. The room ratio compares its rate with node 1 using the unrounded values.

Outdoor-adjusted index. Divide the magnitude of the overnight cooling slope by the mean simultaneous indoor minus outdoor temperature difference. The result is per hour. It describes that room and weather window. A heat-flow or fabric U-value measurement requires other instruments.

Moisture. The air margin is the difference between measured air temperature and calculated air dew point. A surface can be cooler than the air. A wall-margin or crossing time needs its own paired surface reading.

Inspect the sealed PDF & verify its fingerprint

British house · seven-night example

2,016 of 2,016 five-minute intervals per node, 10,080 of 10,080 node readings in all. All five use a common UTC grid. No individual row deletions are permitted in a sealed record.

Verification ID
EX-16a335652162531fb639c012135ac88b
PDF SHA-256
1cd552b3541ea53f83edfcb8344527f72e8c53b3e85122309d2477aacd4bebb6

A match identifies the issued example file. Its readings are illustrative. For a field case, the file check cannot establish sensor placement, heating state or the cause of an observed change.

In the field

Where the case earns its place.

Housing & heritage portfolios

Move one case between authorised homes. Compare occupied rooms before assigning a surveyor or prioritising capital work. Use overnight changes to choose when to inspect communal heating controls.

Sellers, portals & lenders

When a EPC uses default values, share the week’s measured curves alongside the certificate and survey. The record shows the rooms and hours that merit a closer look.

See the single-room seller’s pack

Retrofitters & surveyors

Keep the first room labels and positions. After works, run the same seven nights at comparable outdoor temperatures and record any differences in occupancy or heating. From the case’s private link, archive the sealed PDF, reset all five nodes and record permission for the next instruction. Keep both files for the client.

Equipment & evaluation

One case. Three ways to use it.

Every standard case pairs four indoor nodes with a shaded exterior reference. A five-flat deployment can compare five indoor locations. It needs a separate outdoor reference for an outdoor-adjusted index.

Waitlist

Seven-night postal pack

£219

Indicative homeowner price

Four pre-labelled indoor units and one outdoor reference, with a padded return pouch. One seven-night building record, a sealed PDF and a verification ID.

Join the homeowner waitlist

Fixed 30 days

Housing & trade pilot

£1,695

Five-box case · excluding VAT

One reusable case, pre-configured mobile service and seven-night reports. The 30-day evaluation is non-renewing. The case can be reset throughout 60 days of trial access. Six to eight sequential seven-night scans are possible in that window, depending on collection and redeployment.

100% pilot credit toward an agreed fleet or partner rollout within 60 days of the first on-site reading.

Request the five-box pilot

Buy outright

Reusable fleet case

£3,450

Five-box case · excluding VAT

Buy all five nodes with a multi-property pass for ten years or 500 MB per node, whichever comes first. Unlimited property resets during the pass. No fee per reset.

At 25 seven-night scans a year for ten years, the upfront case cost is £13.80 per scan before VAT. Batteries and transport are separate.

Request fleet pricing
Pre-configured dispatch within 10 working days of a confirmed accepted order. The homeowner pack is a waitlist. Placing an enquiry reserves no stock and starts no payment.

Project enquiry

Request a case or dated pricing.

Tell us which pack and destination you are considering. Commercial prices exclude VAT. We confirm any VAT, carriage and supply terms before you can place an order.

The reference can appear on your pricing PDF. No property address is needed at this stage.

An enquiry or pricing download takes no payment. We issue a formal quotation when the destination, tax and supply details are confirmed. Other documents are marked as budget estimates. How we use these details.

Measurement & placement

What the numbers can tell you.

Four rooms and the weather

Cooling reflects a mix of heat transfer, air movement, thermal mass, sunshine, open doors, heating and occupants. The box cannot determine the cause, boiler efficiency, heat-pump suitability or a bill saving. A timer change needs checking against the heating controls.

Heating and access

Keep the home at its usual safe temperature. The heating-off periods are assumptions in the examples. Record actual heating times when known. Obtain owner authority, agree access with occupants, use safe positions and shade the outdoor node.

Equipment and accuracy

The proposed case records numeric °C and %RH only, with no camera or microphone. The design targets are ±0.2°C and ±2 percentage points RH. Finished-unit performance requires bench confirmation. Mobile coverage affects receipt times.

Energy certificates and surveys

This record covers air temperature and humidity at the measuring points. It is not a SEAI BER or DEAP assessment, UK EPC or RdSAP/HEM assessment, EU national certificate or French DPE, ISO 9869 heat-flux U-value measurement, blower-door airtightness test or SCSI/RICS building survey.

An EPC describes a property’s energy performance using its assessment method. Our example uses an existing home in England. Add a room record to the property file for a separate view of one week of conditions.

Private records

Use neutral room labels. The account holder controls sharing. A file check verifies the issued record. The evidence does not establish a legal threshold, an unsafe dwelling, a party at fault or a heating-system fault. Read the equipment and record terms.